daiwa sealine-x 30 shv rebuild

[Hara_san]

Alan,

Fished the 20 with 50lb and it does not handle well...After a few times the gears had slop in them...

Trinidad handles are well worth the money, period

[word-doctor]

I just finished this fix (Penn 440 washers) on an SL30SH: what a pleasure to work on! Even easier to put back together than a jigmaster (much better design with clutch and dog). Will try out the drag tomorrow with weights to get a sense of where it's at, but it was pretty smooth with felt--now it's just plain slick.

Alan, I'd have figured it out by myself but not the fricking burr. I'd still be looking for a non-existent pin to push out to get the drag off... thanks as always.

[jig guy]

What is everyone using for Grandwave drag washer replacements? I have a 20 SHV and need to tear it down. I think my washers are finally toast.

Thanks.

Russell

[alantani]

should be the same. here's a list of all of the dimensions for all of the penn drag washers. you can measure yours and match them up with something on the list.

http://www.bloodydecks.com/forums/re...imensions.html

[HERRGOTT]

Hello Alan, Thanks for the dedication.

I´ve got a doubt, why did you put grease on the drag washers?
does it generate an impairment on the drag´s performance?

Thanks!

PS. Sorry but my english isn´t good at all...