[JerseyBro]

Looks like I need to tottally rebuild or replace my Alpha Stern drive unit.
I found this replacement unit on line. E-Bay
Sounds to good to be true! $1195. (new) free shipping
Has anyone had experience or know about this Out drive?
Made by Brunswick. SE106

http://www.sterndrive.cc/se106-sterndrive/se106.htm

American-Built
Free Technical Support 7 days a week at (919) 247-0928

These are Brand New replacement units with One Year Factory Warranty !!!

These units are priced far below even O.E.M wholesale prices!!!

OEM List is $5048, so you'll save thousands of dollars.

Call Us at (919) 247-0928 For Questions or Tech Support.

Outdrives ship in two halves, easy installation instructions included.

If you are not replacing an existing outdrive, a hardware kit will be required ($55).


Also available with an anode kit, trim fin and carrier zinc ($35.75) See our other auctions or call us at (919) 247-0928 to order.

All ratios currently available.

Orders placed today typically ship within 48 hours.

Generation two units (1991 and later) also available (Only $1395). Counter-rotation units available now! Call Us at (919) 247-0928.



The High Quality Outdrive you are purchasing is built in the USA to be 100% O.E.M Compatable

Extensive water testing
Hardness testing
Gear Mesh and Contact Pattern
Metal analysis
All of this insures that you will have many years of trouble free service.

These High Quality SternDrives are fully serviceable at your local

Qualified Marine Service Center.

In order to receive the proper gear ratio for your drive you must use chart below:

V-8 engines --- 1.50:1 ratio
V-6 engines ---- 1.81:1 ratio, 1.84:1 ratio
3.7 litre and 470 ----1.81: ratio, 1.84:1 ratio
Inline 6 --- 1.62:1 ratio, 1.65:1 ratio
120, 140, 3.0 litre --- 1.94:1 ratio, 1.98:1 ratio
Please note that Mercruiser changed their gear ratios somewhat in the mid-1980s (for example a V-8 gear ratio used to be 1.50:1, but Mercruiser now uses 1.47:1 ratios. Select the gear ratio based on your engine size)

We are also an Authorized Mercruiser Parts Dealer, so if you want a Mercruiser OEM Drive or parts, send an email to info@getboatgear.com and we'll price those parts for you.

Need a propeller? We sell Mercruiser/Quicksilver and Michigan Wheel aluminum or stainless props. Call Us at (919) 247-0928.

Brunswick Corporation is the Original Equipment Manufacturer (OEM). GetBoatGear.com has no affiliation with the Brunswick Corporation. GetBoatGear.com offers a stern drive designed to replace Mercury Marine's MerCruiser®, Alpha One®, R, MR, and Gen II stern drives. MerCruiser®, Alpha One®, Gen II, R, and MR are trademarks of the Brunswick Corporation. As with any after-market product, any warranties governing products manufactured and/or sold by Brunswick Corporation will not apply to products manufactured and/or sold by GetBoatGear.com.

[bugging57]

Did you buy this drive? I need to replace my alpha one gen 2 and was thinking about buying one from this company.

[skipjack-20]

three year warranty, all parts interchangable with merc parts. I say go for it.

-BTW, It says there NOT made by brunswick. but they are made in the usa, call and find out how many parts are made overseas.

[Pau Hana]

Just talked to Wayne at sterndrive.com regarding the sterndrive.cc units. He said that you'll most definitely get a better financial deal with the SEI unit,buthe also advised that he's taken numerous calls about those units regarding shifting problems, build quality, etc.

Truly, you get what you pay for. For me, the potential headache of having to ship a defective unit across the country would make me think twice about buying it.

[JUST-IN-TIME]

well with a 5 degree back cut gears
shifting is a biztch

they also may pwc motors, same place!

sbtontheweb.com

i would go for it with the warranty

[alien4fish]

Just remember, when it sounds too good to be
true it usually is. Ive learned that lesson myslf.
Good luck bro! let us know how it works out for you