Question? Have you seen These?......

[ConSeaMate]

Visit my eBay Store:TORQUE PLUS INTAKE MANIFOLD GASKETS
Search my eBay Store:

Add to Favorite Stores


I have a small leak in my intake and need to pull the intake manifold......What's your opinion?.....

[YANK N CRANK #2]

Looks like a reed in two stroke reed valve... When those clog up with crap or corrosion... You will need to pull the intake and replace them... I wouldn't put that on a marine engine... The whole idea is more fuel atomization... This is a gimic IMO....

Just get a good set of Fel Pros....

[ConSeaMate]

always looking for an edge........

[LTBOLTMAN]

Originally Posted by WarpDrive

always looking for an edge........

you mean "ledge",,,what kind of sounder you using??

[LTBOLTMAN]

looks like another potential clog in the system

[ConSeaMate]

Originally Posted by LTBOLTMAN

looks like another potential clog in the system

I was thinking that too but the fuel goes thru 3 filters before it gets used.............

[LTBOLTMAN]

Originally Posted by WarpDrive

I was thinking that too but the fuel goes thru 3 filters before it gets used.............

I was thinking more in the area of any small crap going through the air intake; the screen might create more turbulance too...if the race guys don't use it, it usually isn't worth it

[ConSeaMate]

Originally Posted by LTBOLTMAN

I was thinking more in the area of any small crap going through the air intake; the screen might create more turbulance too...if the race guys don't use it, it usually isn't worth it

Thanks for the input.......I didn't get them........

[scuba e]

Forget clogging, what if the "screen" breaks free.

They would also result in "quench". the fuel air mix fould hit the screen and slow momentarily allowing the fuel droppletts to fall out of suspension and pool. not a good burn. Use factory.