View Single Post
Old May-10-2008, 12:59 PM   #2 (permalink)
Fuji_Pedler
Mark@AcidRod
 
Fuji_Pedler's Avatar
 
Name: Mark
Vessel: Yours, lets go!
Location: Glendora
Job:Rod Parts
Lookin' good so far. The opaque that you're seeing is more than likely a build-up of the solids in the CP that has settled in one spot. Most times it can be removed with denatured alcohol. Put some alcohol on a coffee filter or something else that won't leave lint and see if you can't wipe off the spots.
__________________
Mark Griffin
http://www.WestCoastCustomRodShow.com
Fuji_Pedler is offline   Reply With Quote