Bloodydecks.com - View Single Post - Need help replacing my trim/tilt cylinder on my 1990 Volvo Penta 290DP

FishWiz · Jun-26-2006, 06:00 PM

The 290DP Trim/Tilt system really doesn't need bleeding. But I assume the pump/reservoir is the highest in the system. The pump on my setup is above the height of the rams/hoses. The air comes to the top out of the rams and hoses into the reservoir by just running her up and down 8-10 times or so.

Jun-26-2006, 06:00 PM	#7 (permalink)
FishWiz Registered User Name: GAB Vessel: 26' Blackman, The Reel One Location: San Diego Job:I.T.	Re: Need help replacing my trim/tilt cylinder on my 1990 Volvo Penta 290DP The 290DP Trim/Tilt system really doesn't need bleeding. But I assume the pump/reservoir is the highest in the system. The pump on my setup is above the height of the rams/hoses. The air comes to the top out of the rams and hoses into the reservoir by just running her up and down 8-10 times or so.