Bloodydecks.com - View Single Post - accurate 12 twin drag

bertram31 · Nov-16-2005, 01:00 PM

I am a greased drag guy also. My only difference is the grease I use. I have wrote this in post before but hey I will do it again. I use Mobil One synthetic wheel bearing grease. it is the same grease in used in my Nascar Super Late Model and the same grease all the Cup, Busch and Craftsmen trucks use. It does not melt down when the brake rotors are glowing red hot. Try it sometime you will really like it. I havent burned any drags since I started using it 4 to 5 years ago.

I do know several of the Accurates have 100 pounds of drag at full. I am not sure on the smaller 12 but ya it wouldnt suprise me.

Jack

Nov-16-2005, 01:00 PM	#7 (permalink)
bertram31 Longboards Rule Name: Jack Age: 45 Vessel: 48 Egg Harbor "Hakuna Matata" and the 31 Bertram "Reel Keeper" Location: Oahu, HI Job:Captain Bio: Hakuna Matata charters, Oahu Hawaii's only live aboard scuba diving boat	Re: accurate 12 twin drag - rebuild I am a greased drag guy also. My only difference is the grease I use. I have wrote this in post before but hey I will do it again. I use Mobil One synthetic wheel bearing grease. it is the same grease in used in my Nascar Super Late Model and the same grease all the Cup, Busch and Craftsmen trucks use. It does not melt down when the brake rotors are glowing red hot. Try it sometime you will really like it. I havent burned any drags since I started using it 4 to 5 years ago. I do know several of the Accurates have 100 pounds of drag at full. I am not sure on the smaller 12 but ya it wouldnt suprise me. Jack