Bloodydecks.com - View Single Post - accurate 12 twin drag

BluefinCurly · Nov-16-2005, 11:46 AM

I service my own single speeds (got em all) and let the boys work on my 2 speeds.

The drags are intended to be dry , so I simply knock off the solids and clean them with carb cleaner or alcohol and let them dry thouroughly and have had good results.

I'll ask Doug about the grease next time I get a chance to talk to him.

I agree with Jack. While they maybe at a disadvantage from a casting standpoint (overruns) the drags are simply the best system period.

Nov-16-2005, 11:46 AM	#5 (permalink)
BluefinCurly Skipper Name: Carl Vessel: the Last Minute Location: Norwalk Job:Plastics	Re: accurate 12 twin drag - rebuild I service my own single speeds (got em all) and let the boys work on my 2 speeds. The drags are intended to be dry , so I simply knock off the solids and clean them with carb cleaner or alcohol and let them dry thouroughly and have had good results. I'll ask Doug about the grease next time I get a chance to talk to him. I agree with Jack. While they maybe at a disadvantage from a casting standpoint (overruns) the drags are simply the best system period.