Bloodydecks.com - View Single Post - Newell P440-F

GUERO67 · Sep-02-2005, 03:35 PM

Pull one of the sideplates off, pull the spool out. Take a little steel wool and polish up the spindles, real light though. Take the bearings out of the caps and soak them in white gas for a little while. Pull them out and lay them flat on a paper towel. Now put Speed-X on top of the bearing races and let it soak in a bit. Wipe down the inside of the bearing caps with a QTip. Put it all back together and just adjust the bearing caps until there's just a little play back and forth and you should be good to go. If your close to OB, bring it by and I'll show you............

Sep-02-2005, 03:35 PM	#2 (permalink)
GUERO67 Mansfield to Alijos...... Name: Big Girl, AKA, Miss March Vessel: Chubasco II, Royal Star, Red Rooster 3 Location: 9210B Job:Food Critic for 'High Times' magazine.................................. Pro Staff: Phenix Rods, Happi Sushi, Star Of David Lures	Re: Newell P440-F Pull one of the sideplates off, pull the spool out. Take a little steel wool and polish up the spindles, real light though. Take the bearings out of the caps and soak them in white gas for a little while. Pull them out and lay them flat on a paper towel. Now put Speed-X on top of the bearing races and let it soak in a bit. Wipe down the inside of the bearing caps with a QTip. Put it all back together and just adjust the bearing caps until there's just a little play back and forth and you should be good to go. If your close to OB, bring it by and I'll show you............ __________________ "Life aint nothng but fishes and money"-Capt G.