[Maverick]

I just recently replaced my bait pump with a Rule Pump that i bought from West Marine. I installed the intake to a small hose approximately 6 inches that is attached to my thru hall. I have to remove the hose that attaches to my bait tank from the pump, dip the pump on a sideways angle and the water will begin flowing. I then attach the hose to my bait tank and everything is fine until i hit a large wake. The pump gets air in the line and i have to remove the hose and repeat the process. I have obviously mounted this pump incorrectly, can anybody give me the proper mounting instructions.

Thanks

Bart