|
Thanks Gents,
I had laid down base wrap size A (all in size A) and applied a thin finish coat, then epoxied the guides in place on top of that. I then put my first guide wraps on - what gave way is the epoxy that had set the guide prior to the guide wrap. The guide wrap is good'n tight and the guide doesn't wiggle. It's just that layer of epoxy between the guide and the base wrap popped.... the term loose did mean the guide wiggles, just that it is no longer bonded directly to the base wrap.
FYI: I plan on two full guide wrap layers plus a decorative metallic on top of that. So if that guide to base-wrap bond is not critical I may be good.... THAT's the question.
Thank y'all so much for your consideration and reponses...
Bill
|